因業務調整,部分個人測試暫不接受委托,望見諒。
小模數圓柱齒輪及其傳動公差(試行)檢測
小模數圓柱齒輪及其傳動公差檢測是一項重要的質量控制措施,用于確保機械零部件的可靠性和耐用性。以下是該檢測項目的范圍、項目、方法以及儀器的詳細介紹:
檢測范圍:
小模數圓柱齒輪及其傳動公差(試行)檢測可針對以下樣品分類進行:
- 小模數圓柱齒輪
- 傳動裝置
- 其他相關機械零部件
檢測項目:
檢測項目涵蓋以下各類性能指標分類:
- 齒輪參數測量
- 齒厚度測量
- 齒間隙檢測
- 傳動效率測試
檢測方法:
采用精密的測量設備和儀器進行檢測,常見的檢測方法包括:
- 影像測量法
- 三坐標測量法
- 聲學測試法
- 機械性能測試法
檢測儀器:
以下是幾種常用的檢測儀器及其作用:
- 影像測量儀:用于測量齒輪參數,高精度且迅速
- 三坐標測量機:精準測量齒厚度和齒間隙
- 聲學測試儀:用于檢測傳動效率和噪音水平
服務優勢:
通過小模數圓柱齒輪及其傳動公差檢測,客戶可獲得以下服務優勢:
- 確保產品質量符合標準要求
- 提升產品性能和可靠性
- 減少因機械零部件故障帶來的損失
- 定期檢測,延長機械零部件的使用壽命
小模數圓柱齒輪及其傳動公差(試行)檢測標準列舉
GB/T 2363-1990 小模數漸開線圓柱齒輪精度Accuracy of fine-pitch involute cylindrical gears
HB 0-97-2001 小模數漸開線圓柱齒輪精度
SJ 2557-1984 小模數漸開線圓柱齒輪傳動鏈精度計算方法Accuracy calculating method for spur gear-driven chain with fine pitch
GB/T 2362-1990 小模數漸開線圓柱齒輪基本齒廓Basic rack tooth profile of fine-pitch involute cylindrical gears
SJ 2066-1982 小模數漸開線圓柱齒輪通用技術條件General specification for fine-pitch involute cylindrical gears
SJ 2923-1988 可調中心距小模數漸開線圓柱齒輪副傳動精度計算方法Driving accuracy calculating method for spurgears with tine pitch involute teeth for ajustable distance between centres
GB/T 1840-1989 圓弧圓柱齒輪模數Modules of cylindrical gear with circular arc profiles
HB 0-91-1988 漸開線圓柱齒輪傳動模數 基本齒廓精度
QJ 2014-1990 小模數圓柱齒輪減速器基本參數和尺寸
SJ 1820-1981 優選小模數圓柱直齒輪Preferred fine-pitch spur gears
CNS 6419-1980 圓柱齒輪用齒輪形切齒刀(公差)Pinion-Type Cutters for Cylindrical GearTolerances
SJ 1821-1981 優選小模數圓柱直齒片齒輪Preferred thin plated fine-pitch spur gears
SJ 1823-1981 優選小模數圓柱直齒雙片齒輪(暫行)Preferred double thin plate fine-pitch spur gears (Provisional)
CNS 183-2001 一般機械及重機械用圓柱齒輪-模數Cylindrical gears for general and heavy engineering-Modules
GB/T 1357-2008 通用機械和重型機械用圓柱齒輪 模數Cylindrical gears for general engineering and for heavy engineering--Modules
T/ZZB 017-2015 汽車圓柱齒輪Automobile cylindrical gear
CNS 5285-1984 圓柱齒輪輪齒之精度(個別參數誤差之公差)Accuracy of Cylindrical Gear TeethTolerance for Errors of Indevidual Parameters
GB/T 15753-1995 圓弧圓柱齒輪精度Accuracy of cylindrical gear with circular-arc tooth profile
CNS 5268-1984 圓柱齒輪輪齒之精度(齒合復合誤差之公差)Accuracy of Cylindrical Gear TeethTolerance for Errors of Composite
JB/T 2494-2006(2017) 小模數齒輪滾刀Fine-pith gear hobs
CNS 5267-1984 圓柱齒輪輪齒之精度(累積周節誤差之公差)Accuracy of Cylindrical Gear TeethTolerance for Errors of Cumulative Circular Pitch
JB/T 2494-2006 小模數齒輪滾刀
GB/T 10225-1988 小模數錐齒輪精度Accuracy of fine-pitch bevel gears
JB/T 8853-2015 錐齒輪圓柱齒輪減速器
CNS 5280-1984 圓柱齒輪之螺旋角Helix Angles for Cylindrical Gears
JB/T 8853-2015(2017) 錐齒輪圓柱齒輪減速器
GB/T 15752-1995 圓弧圓柱齒輪基本術語Terminology of circular-arc gear
SJ 1822-1981 優選小模數圓錐直齒輪Preferred fine-pitch straight bevel gears
GB/T 10227-1988 小模數圓柱蝸桿、蝸輪精度Accuracy of fine-pitch cylindrical worm and wormwheel
CNS 5283-1984 圓柱齒輪輪齒之精度(齒廓面元線誤差之公差)Accuracy of Cylindrical Gear TeethTolerance for Errors of Tooth Trace
更多小模數圓柱齒輪及其傳動公差(試行)檢測標準可咨詢工程師,工程師會根據不同產品類型的特點、不同行業和不同國家的法規標準以及客戶的需求,選取相應標準的項目和方法進行小模數圓柱齒輪及其傳動公差(試行)檢測。